It appears that your cart is currently empty
The Godspeed Project MAXX coilover for 2002-2009 Merceds-Benz W211 E-Class Sedan RWD w/o Airmatic is for the tuners that want a track oriented setup that also provides daily commute comfort. With 40 levels of damping valve adjustment, you can easily adjust from stiff to soft simply by twisting the knob. Featuring mono-tube design with large capacity 52 mm dia. JIS seamless carbon steel shock body filled with IP F.A. 5W damper oil with properly valved 44 mm internal pistons to endurance competitiveness on a track course or daily spirited driving on public road. Cold wound springs are made from high tensile SAE9252 steel to ensure durability. Vehicle ride heights are adjusted with lower brackets to offer maximum shock travel in order to provide comfort compared to lowering springs alone. Mostly billet aluminum hardware accessories are used for its weight saving property in order to reduced overall weight of the coil-over system yet remain durable. All parts are replaceable and most importantly shock absorbers can be rebuild for customization or simply purchase replacement cartridge without spending too much for complete new coil-over system. You will experience quicker response times, improved bump absorption and increase grip to increase the safety when pushing your car to the limit!
Features:
Prior to installation, verify all hardware and properly tighten and spring are preload suspension to10 mm.Our technical department is available to answer any other questions.
IF you have factory airmatic suspension or AMG model, please read the following:
For proper install you will need to use rear lower control arms from a Mercedes E350 W211 chassis.
*This coilover suspension kit will NOT fit the 4MATIC/AWD model of this vehicle
SPECIAL NOTES | Prior to installation, verify all hardware and properly tighten and spring preload is set to 5-10mm(1/4-3/8in). Our technical department is available to answer any other questions. |
---|---|
DAMPING LEVELS | 40 Levels |
HEIGHT ADJUSTMENT | Yes |
SPRING RATE(FRONT) | 14 kg/mm (784 lbs/inch) |
SPRING RATE(REAR) | 9 kg/mm (504 lbs/inch) |
SPRING LENGTH(FRONT) | 180 mm |
SPRING LENGTH(REAR) | 245 mm |
CAMBER PLATE(FRONT) | No |
CAMBER PLATE(REAR) | No |
SPRING INNER DIAMETER(FRONT) | 62 mm (2.44 inch) |
SPRING INNER DIAMETER(REAR) | 62 mm (2.44 inch) |
WARRANTY NOTE | No |